CGS-400

$65,000.00

The CGS-400 is our answer to your shaving and grooving problems!

10 micron Fuel/Water separator and filter: for extended life off all fuel line components. Gone are the days of swapping small paper filters that clog immediately!
Easily removable belt guard: for service or replacement of rotating components!
Simple controls: FWD/REV lever actuates self-propelled rear wheels. The farther you push the lever the faster you go in either direction. Cutting depth is controlled by a robust KYB electric over hydraulic lift by a toggle switch, with a physical stop for repeatability
25” width: Our machine can fit through man doors and tight spaces due to its slim profile
Go anywhere capability: With Oversized Forklift drive wheels and wide, smooth front wheels the machine can travel over dirt, gravel, snow, grass, or almost any small obstacle. The hydraulic motors act as a limited slip differential to allow for easy spinning of the machine
EnginAire prefilter: Prefilter significantly increases the life of the air filters in harsh or dusty environments
Multiple fuel storage options: (Qty 2) 5.5gal jerry cans can be mounted which allows for hot-swapping your fuel line and cans for continuous operation. This also allows for fueling of the machines without needing the machines themselves while fueling. A 5.5 gal, hard mounted fuel tank is an option as well if needed
Power to get the job Done: A Vanguard EFI 35HP engine controls the drive wheels and cutting head. No messing with chokes or finicky carburetors in your harsh environments. a 40hp, performance built carbureted engine can be had for additional cost
Proprietary cutting heads: Over 20 years of research, development and testing have gone into our cutting heads; to increase lifespan and get the perfect cut!

THESE MACHINES ARE CUSTOM BUILT IN THE UNITED STATES. EXPECT A 6-9 WEEK LEAD TIME

The CGS-400 is our answer to your shaving and grooving problems!

10 micron Fuel/Water separator and filter: for extended life off all fuel line components. Gone are the days of swapping small paper filters that clog immediately!
Easily removable belt guard: for service or replacement of rotating components!
Simple controls: FWD/REV lever actuates self-propelled rear wheels. The farther you push the lever the faster you go in either direction. Cutting depth is controlled by a robust KYB electric over hydraulic lift by a toggle switch, with a physical stop for repeatability
25” width: Our machine can fit through man doors and tight spaces due to its slim profile
Go anywhere capability: With Oversized Forklift drive wheels and wide, smooth front wheels the machine can travel over dirt, gravel, snow, grass, or almost any small obstacle. The hydraulic motors act as a limited slip differential to allow for easy spinning of the machine
EnginAire prefilter: Prefilter significantly increases the life of the air filters in harsh or dusty environments
Multiple fuel storage options: (Qty 2) 5.5gal jerry cans can be mounted which allows for hot-swapping your fuel line and cans for continuous operation. This also allows for fueling of the machines without needing the machines themselves while fueling. A 5.5 gal, hard mounted fuel tank is an option as well if needed
Power to get the job Done: A Vanguard EFI 35HP engine controls the drive wheels and cutting head. No messing with chokes or finicky carburetors in your harsh environments. a 40hp, performance built carbureted engine can be had for additional cost
Proprietary cutting heads: Over 20 years of research, development and testing have gone into our cutting heads; to increase lifespan and get the perfect cut!